KENT WATER SOFTENER AND SAND FILTER
A water softener is utilized to soften hard water by eliminating the minerals that cause the water to be hard.
Water softeners are explicit particle exchangers that are intended to eliminate particles, which are emphatically charged (fundamentally calcium (Ca2+) and magnesium (Mg2+).
| Model Name | KENT Auto Water Softener |
|---|---|
| Product Code | 11039 |
| Total Power Consumption | 3.5 W |
| Product Dimensions (mm) | 330(L) X 570 (W) X 1120 (H) |
| Water Softened Before Regeneration | 5500 L (Water TDS 500 ppm) |
| Resin Volume | 25 L |
| Ideal place for installation | Whole house at overhead tank |
| Model Name | KENT Bathroom Water Softener |
|---|---|
| Product Code | 11064 |
| Product Dimensions (mm) | 380 (L) X 220 (W) X 890 (H) |
| Water Softened Before Regeneration | 1200 L (Water TDS 500 ppm ) |
| Resin Volume | 5.5 L |
| Ideal place for installation | For flats & individual bathrooms |
| Model Name | KENT Washing Machine Water Softener |
|---|---|
| Product Code | 11063 |
| Product Dimensions (mm) | 215 (L) x 140 (W) x 820 (H) |
| Water Softened Before Regeneration | 600 L (Water TDS 500ppm ) |
| Resin Volume | 1.80 L |
| Ideal place for installation | With washing machines |
| Model Name | KENT Automatic Water Softener 40 |
|---|---|
| Product Code | 11090 |
| Total Power Consumption | 3.5 W |
| Product Dimensions (mm) | 330 (L)x 570 (W)x 1336 (H) |
| Resin Volume | 40L |
| Flow Rate | Max. 4000L/hr |
| Ideal place for installation | Single Phase 110-240V AC, 50-60Hz |
| Model Name | KENT Sand Filter |
|---|---|
| Product Code | 11091 |
| Application | Suitable for Purification of Tap water/Municipal Corporation water |
| Mounting | Floor Standing |
| Product Dimensions (mm) | 232 (L) X 232 (W) X 1005 (H) |
| Maximum Flow Rate | 3000 L/hr. |
| Net Weight | 35.5 kg |
| Inlet water Pressure/Temp. (Min.) | 1.0kg/cm²/1°C |
| Inlet water Pressure/Temp. (Max.) | 10.7kg/cm²/50°C |
| Filter Media weight | 30 KG |
| Model Name | KENT Iron Removal Filter |
|---|---|
| Product Code | 11073 |
| Application | Suitable for removal of iron from raw water |
| Mounting | Floor Standing |
| Product Dimensions (mm) | 232 (L)X 232 (W)X 1005 (H) |
| Maximum Flow Rate | 3000 L/hr. |
| Net Weight | 29.5 kg |
| Inlet water Pressure/Temp. (Min.) | 1.0kg/cm²/1°C |
| Inlet water Pressure/Temp. (Max.) | 10.7kg/cm²/50°C |
| Filter Media weight | 10 KG |
| Gravel Media Weight | 5 KG |
| Brim Media Volume | 12 L |